Spend less, drop more! The OneUp Components Dropper is here!
The OneUp Components Dropper is the worlds shortest long travel dropper. So you can typically fit a longer travel dropper onto your frame than you can with other brands. So if you've always only been able to run a 125mm dropper previously, now you can get on a 150mm Dropper. After all more drop equals more fun!
Want to customise how much drop it's got? The OneUp Dropper can do that too. You can reduce the posts travel by up to 50mm on the bike, without tools or having to remove the saddle and you don't even need to pump it up again! Win! Click the last picture (PDF) for instructions.
The OneUp Dropper relies on a simple cable actuated remote. The cable setup is nice an simple and with the cable being clamped at the lever, you can shorten the housing in seconds. Since the actuation isn't hydraulic, it's not sensitive to temperature differences and if things do go sideways and you break your remote out on the trail, you can pull the post out and adjust the actuator by hand.
The remote itself has a super smooth action thanks to the oversized bearing it runs on. The lever position is unique compared to everything else in that it's positioned further around where the upshift lever usually sits, (not the downshift lever like a normal dropper remote) this allows your thumb to remain wrapped further around the bar and makes it quicker to reach the remote as there is less thumb movement.
170mm - tuneable anywhere from 120-170mm
150mm - tuneable anywhere from 100-150mm
Diameters available 30.9 or 31.6mm
Routing - Internal Only
Weight - complete post, cable, housing and remote - 595g
207mm Stack Height (Collar to seat rail),
450mm Effective Length (Total length excluding the actuator)
110mm Minimum Insertion
187mm Stack Height (Collar to Seat Rail),
410mm Effective Length (Total length excluding the actuator)
90mm Minimum Insertion